Milgauss: What Does A Rolex Servicing Includes?

Milgauss: What Does A Rolex Servicing Includes?

What Does A Rolex Service Offers?

Rolex Milgauss watch owners want to know what is included in the usual Rolex Milgauss Service costs and prices before they spend a lot of money on it. The following is what I've discovered regarding Rolex's service:

According to the Rolex website, Rolex Service Centers 'cover all essential procedures to repair the Rolex Milgauss watch performance and appearance.'

In the price of a Rolex essential servicing, the following is included:

Deep cleaning of a Rolex Milgauss watch

The Rolex Milgauss watch gets extensively cleaned on both the inside and exterior using an ultrasonic cleaner. The Rolex Milgauss watch components will be removed and cleaned individually. As a result of this, any dust or residue will be rinsed away.

Old or worn out parts of the Rolex Milgauss watch caliber will be replaced

The Rolex Service Center will examine every component of the caliber and, if required, replace them. Rolex Milgauss watches require the replacement of wearable components over time. I've also heard that Rolex Service Centers will change the Rolex hands automatically. This hasn't been verified, though. Finally, before the Rolex Milgauss watch is rebuilt, lubricants will be applied to the watch mechanism.

Rolex Milgauss movement calibration

The Rolex Milgauss watch is a timepiece that has been adjusted for accuracy. To guarantee that the Rolex Milgauss watch keeps perfect time, it will be calibrated with electronic technology. The Rolex Milgauss watch caliber will be fine-tuned to Rolex requirements and accuracy. Each day, Rolex Milgauss watch movement must be accurate to within +2/-2 seconds.

A polished Rolex Milgauss

The case and bracelet of the Rolex Milgauss watch will be fully refinished. Despite the fact that it will not lower the cost of service, some Rolex Milgauss watch owners opt not to have their Rolex watches polished.

Gaskets for Rolex Milgausss are replaced as part of the normal servicing

The Rolex Milgauss watch waterproofing will be checked as well, to ensure that it meets the model's water resistant criteria. The water resistance tests are identical to those performed in Rolex's Swiss headquarter factory.

Rolex SA include a two-year service guarantee

Rolex SA provides a two-year warranty on Rolex Service Center work done on the Rolex Milgauss watch. As a result, the Rolex Milgauss watch has a new two-year international warranty on all repairs made.

Rolex Milgauss Wear And Tear Is Not Covered By The Rolex Warranty

Rolex doesn't cover the wear and tear of the Milgauss under its five year warranty. Rolex guarantees do not cover scratches on bracelets, Oyster cases or crystals.

It is included in the standard Rolex service price to polish scratches and marks. During watch service, Rolex Service Centres can replace a scratched Milgauss watch crystal. Rolex will charge for the operation, but it is considered non-essential and aesthetic, so the crystal replacement will not be mandatory.

Why Official Rolex Retailer Watch Servicing So Expensive?

Rolex Service is an expensive service, as everyone knows. When compared to Omega Watch Service, it costs nearly twice as much. Stainless steel Rolex are about the same price as Omega watches, but Rolex Service on them is twice as expensive.

This is because Rolex is a prestigious brand. They are able to charge more for their services since the brand has a good reputation and the demand is so high. The number of independent watchmakers ROLEX SA supplies with spare parts has also been reduced. To have your Rolex Milgauss watch serviced with original parts, you have to go to a Rolex Service Center.

Other watchmakers are not allowed to service Rolex Milgauss watches, due to Rolex's strict policy. Rolex SA will charge you to replace generic parts used in service or repair of a Rolex Milgauss watch with genuine parts the next time you visit one of our Rolex Service Centres (RSCs). If your Rolex Milgauss watch is not serviced by a certified Rolex watchmaker, your Rolex warranty will be null and void.

The work included in a Rolex Milgauss watch servicing is one of the factors that affect the price and value. Rolex's Milgauss watch will be completely dismantled, cleaned, and reassembled by a qualified watchmaker, just as it was in Switzerland's Rolex factory. A Rolex Milgauss watch service involves meticulously inspecting, cleaning, and refurbishing all elements. With the same equipment as in the Rolex factory, the watch is tested for accuracy. Rolex Milgauss watch case and bracelet will be polished with expert precision to restore their original luster. Rolex Milgauss watch will be restored from top to bottom, and their waterproof resistance will be tested.

Due to the labor-intensive nature of the operation, Rolex Milgauss watch servicing is expensive. Watchmakers at Rolex are very expensive, highly qualified watchmakers using top-of-the-line equipment. In their prime city locations, Rolex Service Centers work like a mini Rolex factory. For the convenience of their customers, they are located in the most expensive areas of the city. Owners of Rolex Milgauss enjoy a high level of expertise and a luxurious experience at Rolex Service Centers. The cost of Rolex Milgauss watch overhaul servicing is reflected in all of these factors. 

There is a maintenance cost associated with every mechanical watch. The Rolex Milgauss Service only needs to be performed every ten years if you are a careful owner. Rolex Milgauss service costs are around $120 per year when you divide the average Rolex service cost over 10 years. You should take the cost of service into consideration when shopping for a Rolex Milgauss. 

Does Rolex Warranty Apply For Watches Damage By Users

Why do Rolex Milgauss stop working. In their Rolex Milgauss watch guidelines, Rolex SA outlines how the watch should be used. The Rolex guarantee will not cover damage caused by misuse of the watch. It is the owner's responsibility to pay for the repair of a damaged Rolex Milgauss.

When a Rolex Milgauss watch is submerged in water, the most common water damage is caused by forgetting to screw down the crown, leaving the crown tube open. It will not be covered by the warranty in this case.

Can The Rolex Milgauss Bezel Be Repaired Under The Warranty?

The Rolex warranty covers any factory defect on the bezel or any component of a Rolex watch, but misuse of the bezel will not be covered under the warranty.

During Rolex Service Center's watch service, damaged or scratched Rolex Milgauss watch bezels can be replaced. The watch will be repaired with a new genuine Rolex Milgauss part. Rolex charges an additional fee for the replacement. Before beginning any work, you will be informed by the Rolex Service Centre. Most of the time, Rolex replaces a damaged bezel and does not attempt to restore it. For a modern Rolex Milgauss, you usually want to replace the bezel.

The bezel of a vintage Rolex Milgauss

When it comes to vintage Rolex Milgausss, the bezel may be a valuable element. A restored vintage bezel, not a replacement, is what you need. Generally, Rolex Service Centres replace parts rather than restoring them.

While a Rolex watch is being serviced, its objective is to return both the functionality and the aesthetic of the watch. The Rolex Milgauss watch value on the second-hand collectors market is not Rolex concern. The problem could arise if you own a collectable vintage Rolex Milgauss watch.  Check the value of your vintage Rolex Milgauss watch on the pre-owned collectors market before you ask a Rolex Service Centre to repair it.

Is The Rolex Service Included In The Rolex Warranty?

Rolex Milgauss watch service costs are not covered by the Rolex warranty. For five years from the date of purchase, Rolex guarantees the Rolex Milgauss watch to operate as intended. You need to consider the service costs of your Rolex Milgauss watch when purchasing one.

In terms of warranty coverage, the Rolex warranty covers only manufacturing defects and does not cover normal wear and tear over its lifespan. As a result of normal wear and tear occurring over the course of its use, Rolex Service restores your Rolex Milgauss watch to its original functionality and aesthetic. Due to this, servicing your Rolex Milgauss watch is not covered under the Rolex warranty.

If the Rolex Milgauss watch fails to function properly due to a manufacturing defect, Rolex will pay for the repair. It is extremely rare to find a Rolex Milgauss watch that has a factory defect because of Rolex SA's obsessive commitment to quality control.

World Time

Feature Rolex Model

Rolex Milgauss 116400 Black 40mm Stainless Steel

Rolex Milgauss 116400 40mm Black Dial (2007), Automatic Mechanical Movement, Stainless Steel Oyster Case, Water Resistance 100 meters. Rolex Milgauss timepieces are built to last and are distinguished by their traditional and timeless aesthetics. In 2007, Rolex released the Milgauss 116400 watch. 2013 marked the end of Rolex's production of the watch.

Each Rolex Milgauss timepiece is meticulously handcrafted in Switzerland using only the finest materials to ensure unsurpassed quality. Rolex Milgauss 116400 watch case is Stainless Steel: Milgauss watches with stainless steel cases are made of Oystersteel. Oystersteel is a brand-exclusive alloy. When polished, Oystersteel offers an outstanding finish and maintains its beauty even in harsh conditions. Rolex owns and runs an exclusive foundry, allowing it to cast the highest-quality alloys with unmatched precision.

Due to the fact that they have patented Rolex Oyster water-resistant watch cases, Rolex Milgauss 116400 are guaranteed waterproof up to 100m/330ft. Rolex manufactures all its oyster cases in-house and tests them carefully for waterproof ratings. The watertight winding crown on Rolex Milgauss 116400 is called Twinlock winding crown. By covering the tube and winding crown with two sealed zones, Twinlock Technology ensures a completely waterproof screw-down crown.

Rolex dials are produced from the purest metals and are rigorously tested using cutting-edge technology in the company's own laboratory. In order to get true metallic dial hues like Black, Rolex dial treatments are crucial. The Rolex Milgauss 116400, like all Rolex watches, offers extraordinary readability in all conditions, and especially in the dark, owing to its Chromalight dial. Rolex Milgausss are composed with scratch-resistant Sapphire crystal. Rolex places a premium on quality in all it does.

Model Specifications  
Model Rolex Milgauss 116400-0001
Case Diameter 40 mm Round
Case Material Stainless Steel
Water Resistance 100 m
Dial Black , Stick / Dot Indexes
Calibre Rolex caliber 3131
Movement Type Automatic
Power Reserve 48 Hours
Frequency 28800 vph/bph
Calibre Diameter 28.50 mm
Jewels 31

Model Using Same Caliber

  • Rolex Milgauss Black Stainless Steel 40mm ref 116400GV-0001
  • Rolex Milgauss White Stainless Steel 40mm ref 116400-0002
  • Rolex Milgauss Black Stainless Steel 40mm ref 116400-0001
  • Rolex Oyster Perpetual Black Stainless Steel 40mm ref 116900-0001
  • Rolex Milgauss Blue Stainless Steel 40mm ref 116400GV-0002

People Also Ask

Social Media

twitter facebook youtube pinterest linkedin instagram behance

By using this website you agree to our cookie & privacy policy. Go it!